Winder Inspection for Flexible Materials

The Rewer is a high class winder designed to inspect and correct web after the preliminary slitting process. The purpose of the additional winding is to improve the quality of side surfaces, control of the print quality, and remove faulty web to ensure that only the best product is rewound for shipment. The Inspector optimizes the winding process by allowing the user to wind the web in both directions.

Working Width400 mm (15.75 in) / 500 mm (19.69 in) / 600 mm (23.62 in)
Unwind Diameter600 mm (23.62 in) / 800 mm (31.5 in)
Rewind Diameter600 mm (23.62 in) / 800 mm (31.5 in)
ID Core on Unwind70 mm (2.76 in) / 76 mm (3 in) / 152 mm (5.98 in)
ID Core on Rewind70 mm (2.76 in) / 76 mm (3 in) / 152 mm (5.98 in)
ApplicationPackaging for food industry, flexographic printing houses, health care materials, and pharma materials
Download Specs

  • Winding in both directions
  • Automatic tension control
  • Automatic web guiding system including ultrasonic sensor
  • Inspection camera
  • Edge slitting and removal system
  • End parent roll detection
  • Torn web detection
  • Standard control / touch screen panel
  • Intranet data transfer from touch screen panel to an indicated IP address
  • Machine service at a distance